Carbonization is an important step in the production of charcoal machines. The process of producing charcoal powder in the carbonization furnace is smokeless, tasteless and non-toxic. The machine-made charcoal produced is generally welcomed by the market. In recent years, it has continued to move forward. Now the carbonization furnace manufacturer will explain to you the steps of the carbonization furnace when it works.
The carbonization furnace must first ignite the combustibles in the gasification furnace (such as sawdust, wood scraps, etc.), and the flue gas generated after combustion is sprayed, cooled, and purified in the pipeline. The combustible gas (carbon monoxide) , Methane, ethane, etc.), as the heat source for the early carbonization, heating and drying the raw materials in one or two carbonization tubes in the carbonization furnace, and the third and fourth carbonization tubes are carbonized. The flue gas generated in the carbonization process is then sprayed, cooled, purified and other processes, so that the generated combustible gas undergoes secondary combustion. Circulate in this way, use the heat generated by the body to burn the body, and achieve the effect of energy saving. Moreover, after the flue gas is purified in the pipeline, there is no flue gas in the production environment, which is environmentally friendly and meets the national exhaust gas exhaust standard. If the automatic gas generator is not used for natural gas calcination, it is necessary to modify the natural gas burner device. If the flue gas treatment is incomplete, it is necessary to install a fume remover device, and an automatic cooling and cold water system should be equipped. The key steps are the control of the heating stage.